Original Item: Only One Available. The Model 1854 Lefaucheux pinfire revolver was a large frame single action variant of this popular French pinfire system. The serial number 7727 is well before the range of numbers of the revolvers officially imported to the USA during the Civil War (approx. 25,000-37,000). However, it was a very common practice for officers to procure their own revolvers, especially if they wanted a backup.

The 1854 model was the first metallic-cartridge revolver adopted by a national government. Most were produced either at the state arsenal in St. Etienne (MAS), Liège, Belgium, or local producers under license. The revolver was sold to the civilian market as well. Most military models were produced only with single-action, whereas civilian models were made primarily with double action. This model revolver, as well as the earlier M1854, were imported in large numbers by both the North and South during the American Civil war.

In many ways the large bore martial pinfire revolver, based upon the patents of Casimir and Eugene Lefaucheux was one of the most modern and advanced military handguns to see use on the battlefield during the American Civil War. Thousands of these pinfire revolvers were imported for use by US troops, and at least a few hundred saw service with Confederate troops as well. Although US government purchases only record about 13,000 M-1858 Lefaucheux patent pin fire revolvers as being officially purchased (along with over 2.2 million cartridges), surviving examples and regimental records indicate that far more than that were imported. The primary importer of M-1854 revolvers was George Schuyler who purchased 10,000 Lefaucheux revolvers for the US government. Most of Schuyler's purchases appear to have been made directly from Lefaucheux in Paris. However, extant examples with American Civil War provenance indicate that many Belgian licensed copies were also imported during the war.

The Ordnance Department did not appear to differentiate between the French and Belgian made versions, much like they often lumped French and Belgian made muskets together without any distinction at all. Other importers who provided pinfire revolvers to the US government included Herman Boker, Schuyler, Hartley & Graham, George Raphael (who provided the Raphael revolvers to the US), Alexis Godillot of Paris (who provided the Perrin revolvers to the US) and even Tiffany & Company. Period documentation indicates that pinfire revolvers saw significant use by Confederate soldiers as, and many deep south arsenals maintained inventories pin fire cartridges and even offered the pistols for sale to officers. However, the use of pin fire revolvers by the North and South was not limited to the 12mm military guns. Many men took privately owned, "civilian" pattern pin fire revolvers into the field. It is not uncommon for relic diggers to find 7mm, 9mm as well as the more common 12mm pinfire cartridges in known Civil War campsites. Excavated and recovered pinfire revolvers are known from these campsites as well, and at least one privately owned 9mm pinfire was recovered from the wreck of the USS Cairo gunboat, and is on display at Vicksburg National Military Park.

This pistol is a very good example made by E. Lefaucheux itself in France, intended for retail sale and/or export, and is in very good display condition. In this case, the retailers added some lovely engraving on the top of the barrel, as well as on the grip escutcheons. The top strap bears the engraved retailer information:

The brothers Alphonse and Charles Lepage worked at this location in Paris from 1857 until 1868, right around the Civil war period. We assume this example was purchased early or pre-war, as it pre-dates the officially imported examples. However it is always possible that it was in stock for a time at Lepage.

The pistol follows the pattern standard French made M-1854 Lefaucheux single action military pinfire revolver. Known as the "Cavalry Model", this has a flat bottom grip with a lanyard loop, and a trigger guard with a spur on the bottom. It is correctly chambered for the 12mm variant of the round. The bore measures 11.45mm groove to groove, with the chambers measuring 11.47mm at the front and 12.10mm at the rear. Some manufactures refer to this as 11mm, as the actual bullet diameter is closer to 11mm than to 12mm.

The pistol is approximately 11 3/4" in overall length, with a 6 3/8" round barrel. The bore is rifled with four grooves with a very slow rate of twist, which almost appears straight. The bore shows crisp rifling and a bright finish, with little sign of use. The loading gate is present and functional, though the button on the end of the spring may have broken off.

The gun bears serial number 7727 on the right side frame under the cylinder, and to the left of this is LF under the company logo. The left side of the frame is marked with the manufacturer license information.

This looks to be an early patent marking, as it lists it as "Invention" next to Lefaucheux's name, over what is essentially a "patent pending" marking. This is short for "Breveté Sans Garantie Du Gouvernement“ (patent without government guarantees). Examples produced later did not have the "SGDG" marking. Aside from these markings and the markings on the barrel, the revolver is unmarked.

The Pin Fire Cartridge had a pin protruding from it's side which when in the revolver's cylinder extended outside the cylinder wall. When struck by the hammer pushing the pin into the cartridge the internal primer was ignited and the cartridge discharged. This process was a lot faster and easier than muzzle loading and capping as were the standard Army Percussion revolvers of the day. Despite this convenience the revolver was not a success, it was considered not rugged enough for Military Service and accidental discharge of the cartridges before being loaded into the weapon became a serious problem.

The revolver is in very good working condition and has a nice aged bright steel patina. It cycles well, but can be finicky, and does not properly advance at times. The wood grips are very nice, and have a lovely red brown color.

An interesting early example of a French Revolver model that was imported in large numbers for use in America's most tragic war, with a serial number that fits right into that story. Ready to display!

Specifications: 

Year of Manufacture: circa 1860
Caliber: 12 mm Lefaucheux
Ammunition Type: Pinfire Cartridge
Overall Length: 11 3/4 inches
Barrel Length: 6 3/8 inches
Action: Single Only
Feed System: 6 Shot Revolver

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these.